Artisan Epoxy Flooring of PleasantonArtisan Epoxy Flooring of Pleasanton

Flooring Contractor in Livermore - Garage and Shop Floors Built on Good Prep

Artisan Epoxy Flooring of Pleasanton coats, polishes and repairs concrete floors for Livermore homes and businesses, from two-car garages and basements to shop floors and pool decks, with the slab tested and ground before anything goes on.

Polished concrete floor with exposed aggregate and glossy reflections in a bright room beneath a staircase.
  • Licensed and fully insured.
  • Free quotes on site.
  • We respond within 1 business day.

About Livermore, CA

Livermore is a short drive from us in Pleasanton, and the calls we get there come from all over the city. We hear from older houses close to downtown, newer subdivisions farther out, and the shops and restaurants in the historic downtown district, where a floor has to look good and take steady foot traffic. Our Livermore work ends up split between homeowners and business owners more than it does in Dublin.

Most of the houses we see have attached garages on slab, and plenty of those slabs carry years of oil, old sealer or a peeling kit coating, so a job here usually starts with grinding back to clean concrete.

Services in Livermore, CA

  • Garage Floor Coatings

    Livermore's attached garages often carry years of oil drips and some hairline cracks. We grind the slab, fill the cracks and lay down a flake coating that cleans up with a hose.

  • Metallic Epoxy Flooring

    Some owners here want a home gym or garage that looks finished, not coated. Metallic epoxy flooring gives a swirled, glossy look, and we prep the slab first so it stays bonded.

  • Polished Concrete Flooring

    Shops and offices downtown often sit on bare slabs that take heavy foot traffic. We grind and polish the concrete itself, so there's no coating to wear through.

  • Urethane Cement Flooring

    Restaurant kitchens downtown deal with hot water, grease and daily washdowns. We install urethane cement, which handles heat and constant wet cleaning better than a standard epoxy.

  • Pool Deck Coatings & Resurfacing

    Backyard pool decks here see heavy use all summer and start to crack and roughen with age. We repair the cracks and resurface the deck so it's smoother underfoot.

  • Commercial & Industrial Epoxy Floor Coatings

    Property managers here call us when a shop or tenant space needs a floor that takes carts and forklifts. We grind, repair and coat with epoxy built for that traffic.

What to know before a floor job in Livermore

If your floor job needs a permit, the City of Livermore issues it through its plan review and permit office, and that decision is the city's, not mine. The city doesn't issue permits over the counter or offer fast-track review, so when one is needed, your start date waits on the city and we plan around it. I check with the city before we start, and if a permit is needed, we take care of getting it. Before you hire anyone, make sure they hold a California contractor's license and an active Livermore business license. The questions below explain both.

In Livermore the price mostly comes down to the slab: how big it is, how many cracks need filling, whether old sealer or a failed coating has to come off, and what the moisture test shows. The system you pick matters too, because a flake garage coat, a metallic finish and polished concrete each take a different amount of work. The schedule depends on testing, prep and any permit, and for downtown shops and restaurants we can work around your business hours. Your written estimate gives you your own number. We do the same work in San Ramon and the other cities around Pleasanton, and I run the crew on every one of those jobs.

Livermore, CA properties and local conditions

Livermore gets about 16 to 18 inches of rain a year, nearly all of it between October and April, and the summer months usually see no measurable rain. Wet winter ground can push moisture up through a slab, and moisture under a fresh coating is one of the main reasons floors lift. I test the slab for moisture before we coat it, and we plan outdoor work like pool decks and patios for the dry months.

The garages we see here run from older slabs near downtown with oil and old sealer soaked in to newer houses where a store-bought kit is already peeling. Either way, we grind back to clean, open concrete first, because a coating only holds as well as the surface under it.

Get a free on-site estimate for your Livermore floor

We reply within one business day, and the estimate is free with no obligation. I come out to your Livermore home or business myself, look at the slab, ask how you use the space and put the price in writing.

How a Livermore floor job goes once you call

  1. Call or send the form

    Call (925) 209-2459 or use the form, and we'll set a time for me to come out. It helps if you can be there to show me how you use the space.

  2. I look at the slab

    I check the concrete for cracks, old coatings and moisture, ask what the floor has to handle and talk through the systems that fit. You get a written estimate before you commit to anything, and if a floor isn't a good fit for what you want, I'll tell you then.

  3. We test, prep and finish

    Once you pick a system, we set the date around testing, prep and any permit the city requires. Our own crew does the grinding, repairs and finish, with no subcontractors.

  4. Walk the floor together

    When the floor is done, I walk it with you and go over how long to wait before foot traffic and cars. You'll also know how to keep it clean.

Frequently asked questions

When does California require a contractor's license for flooring work?

California requires a license whenever the job needs a building permit, uses any workers beyond the one person doing it, or costs $1,000 or more in labor and materials combined. Someone can skip the license only when there's no permit, no employee labor and the total is under $1,000, all at once, and they don't advertise as licensed. We're licensed and fully insured.

Does a flooring contractor need a Livermore business license?

Yes. The city requires a Livermore business license for every person or business that provides a service in Livermore, and it asks contractors to have that license active before they apply for a permit. Ask any contractor you're considering whether theirs is current.

How much does an epoxy garage floor cost in Livermore?

It depends mostly on the size of the garage, the shape the slab is in and the system you choose. Cracks, oil, old sealer or a peeling kit coating all add prep time, and a metallic finish takes more work than a standard flake coat. I'll give you a written price after I look at the slab.

How do I know if my Livermore garage slab is ready for epoxy?

A moisture test and a close look at the surface will tell you, and both are part of my first visit. If water beads up instead of soaking in, there's sealer or oil in the concrete that has to be ground off, and wide or moving cracks need repair before anything goes on.

What causes epoxy garage floors to peel or lift?

Usually it's poor prep. The coating went onto a slab that wasn't ground, was still holding oil or old sealer, or had moisture coming up from below. That's why we grind, repair cracks and test for moisture first, and we're extra careful with moisture readings after a wet Livermore winter.

Why can't water pipes run under a concrete slab in Livermore?

The city's building code bars water distribution piping under concrete floor slabs inside buildings, because the soil in parts of Livermore corrodes that piping. We don't do plumbing ourselves, but if your remodel moves water lines, the plumber should route them before we grind and coat, so nobody has to cut into a finished floor later.

Service areas

Explore the services

Pleasanton, CA

Tell us about your Livermore floor project

We answer the phone until 11 PM on weekdays, so call (925) 209-2459 after work or send the form, and ask about the permit steps while you're at it.

(925) 209-2459Request a quote