Artisan Epoxy Flooring of PleasantonArtisan Epoxy Flooring of Pleasanton

Flooring contractor in Ashland, CA - coatings that bond to older slabs

Artisan Epoxy Flooring of Pleasanton is a flooring contractor working in Ashland on garage, patio and shop floors. We test and grind the slab before a coating goes down, so the finish has clean concrete to grip.

Request a quote(925) 209-2459
Speckled sealed concrete porch steps and landing beside a red brick wall.
  • Licensed and fully insured.
  • Free quotes on site.
  • We respond within 1 business day.

About Ashland, CA

Ashland sits packed in between San Leandro and Castro Valley, with East 14th Street carrying most of its shops, small offices and apartment buildings. Off the main roads, most of the homes we're called to are older single-story houses on tight lots, along with duplexes and complexes where the garage or carport is shared.

That mix shapes the job. A garage that's been a workshop for decades usually has oil soaked in, paint over paint and a few old patches, so in Ashland the real work is getting down to sound concrete before anything goes on it.

Services in Ashland, CA

  • Garage Floor Coatings

    Many Ashland garages double as storage, laundry and workshop, so the old slab carries oil and paint. We clean, grind and coat it so it wipes clean and holds up.

  • Concrete Grinding & Surface Preparation

    Older slabs here often hold sealer, paint or glue you can't see, and coatings grip poorly over it. Our concrete grinding and surface preparation opens the concrete first.

  • Commercial & Industrial Epoxy Floor Coatings

    Storefronts and tenant spaces here see steady foot traffic and carts that wear thin finishes through. We lay commercial epoxy built for that use over a freshly ground slab.

  • Concrete Floor Stripping & Removal

    Plenty of older Ashland homes have tile, carpet glue or peeling paint over the concrete. We strip it to bare slab so the new floor doesn't sit on an old problem.

  • Polyaspartic Floor Coatings

    When the garage is your only covered parking or a tenant needs the space back fast, a long cure is a problem. Polyaspartic cures quicker than standard epoxy, so we often suggest it.

  • Concrete Sealing

    Patios and side paths on small lots take hoses, grills, planters and weather. We clean and seal outdoor concrete so water and stains sit on top instead of soaking in.

Permits, licenses and pricing for floor work in Ashland

Ashland has no city government, so permits here come from Alameda County. Its building inspection division issues permits and does inspections for privately funded work in the unincorporated parts of the county, and when a job needs one, the county's review has to clear before we can start. We check with the county before every job and take care of the permit if one is needed. Before you hire anyone, ask for their license from the Contractors State License Board and whether they carry the county business license, which the county requires for any business working in its unincorporated areas, even one based in another city. We're licensed and fully insured, and our work is backed by our satisfaction guarantee.

Ashland is a quick run up I-580 from our base in Pleasanton, and the same crew works in Hayward and out in Alamo. Your price comes down to the slab, meaning its size, how much old coating or glue has to come off, how many cracks need repair and which system you pick. The date turns on testing, grinding, a permit if one's needed and dry weather for outdoor work. After I look at the floor, I put your price in writing.

Ashland, CA properties and local conditions

Most Ashland slabs we see were poured a long time ago and have had a full life since, with car drips, spilled paint, old sealers and hairline cracks. Coatings don't grip any of that well, so I test the slab for moisture, we grind it to bare concrete and we fill the cracks before a coat goes down. If a slab can't take the floor you want, I'll tell you on the first visit and point you to one it can.

Almost all of the county's rain falls from October through April, according to the county's own findings. That matters most for patios and walkways, which need dry concrete to take a sealer or coating, so we plan outdoor work for the dry months and keep garage and shop floors on the calendar through winter.

Get a written floor estimate for your Ashland home or shop

We reply within one business day to set a time, and I come out to Ashland myself to look at the floor. The estimate is free, done on site, and comes with no obligation.

How a floor job goes when you call us in Ashland

  1. Call or send the form

    Call (925) 209-2459 or send the form, and we'll set a time for me to come out. It helps if you're home so you can show me how you use the space.

  2. I look at the slab

    I check the concrete for cracks, old coatings and moisture, talk through the systems that fit, and give you a written estimate. You'll have the price on paper before anything goes on the calendar.

  3. We test, prep and coat

    Once you pick a system, we set the date around moisture testing and grinding, since those decide when the coating can go down. Our own crew does the prep and the finish.

  4. We walk the floor together

    When it's done, we walk the floor with you. We go over when you can use it and how to keep it clean.

Frequently asked questions

Where do I apply for a building permit for work in Ashland, CA?

You apply through the county's Permit Portal, where owners and contractors apply for permits, submit plans, schedule inspections and check permit status. If your floor job needs a permit, we handle the application, so you don't have to work through the portal yourself.

When does a flooring contractor need a California license?

A contractor needs a state license whenever a job requires a building permit, uses any additional workers, or costs $1,000 or more in labor and materials combined. A license is only not required when none of those apply and the person doesn't advertise as licensed, so a floor done by a crew falls under the board's rules.

How much does it cost to put epoxy on a garage floor in Ashland?

Your price depends on your slab, so I give it to you in writing after I've seen the floor rather than over the phone. Size, cracks, old paint or sealer that has to come off, moisture and the system you pick move it the most, and a plain solid-color coat costs less than a full flake or metallic finish.

What causes epoxy to peel off a garage floor?

Most peeling comes from the prep, not the coating, because epoxy put down over oil, old sealer or damp concrete has nothing solid to grip. On older Ashland slabs we test for moisture and grind the surface before anything goes on, because prep is the part you can't fix later.

What is the best way to fix cracks in a concrete floor before coating it in Ashland?

The best way is to open each crack, fill it with a repair material and grind it flush before the coating goes on, so the line doesn't show through. The county's own findings note earthquake fault zones across the county, including heavily populated stretches of the Hayward Fault, and while that doesn't place your lot in a zone, it's one reason I look hard at cracks that may still be moving and tell you which ones could come back.

Can you redo the floor in a shop or tenant space on East 14th Street in Ashland?

Yes, we do commercial floors there, and property managers call us when a shop or tenant space needs a new floor. I'll look at the slab and how the space is used, then we plan the work to keep it out of service as briefly as the system allows.

Service areas

Explore the services

Pleasanton, CA

Ask about your Ashland floor and permits

If your floor is already peeling, one look tells you whether it can be recoated or has to be stripped first, before you pay for another coat.

Request a quote(925) 209-2459
(925) 209-2459Request a quote