Artisan Epoxy Flooring of PleasantonArtisan Epoxy Flooring of Pleasanton

Flooring Contractor in Danville, CA - Garage and Pool Deck Floors Prepped Right

Artisan Epoxy Flooring of Pleasanton is a flooring contractor based in Pleasanton, CA, and we coat, polish and seal concrete floors across Danville, from multi-car garages and basements to pool decks and downtown shops.

Request a quote(925) 209-2459
Speckled sealed concrete porch steps and landing beside a red brick wall.
  • Licensed and fully insured.
  • Free quotes on site.
  • We respond within 1 business day.

About Danville, CA

Danville is mostly single-family homes on roomy lots, with a walkable downtown of shops, restaurants and small offices in the middle. Out in the neighborhoods we're usually standing in a two- or three-car garage, a basement or rec room, or a backyard with a pool. It sits between Alamo and San Ramon, and the houses in all three have a lot in common.

Many houses here have been lived in for decades, so the slab we find often carries old sealer, a worn store-bought coating, oil stains and cracks that were patched more than once. That history decides how much grinding and repair comes before any finish, which is why I look at the concrete before we talk about color.

Services in Danville, CA

  • Garage Floor Coatings

    Danville garages often double as a gym, a shop and storage at once. We grind the slab, fill the cracks and lay a flake coating that hoses clean.

  • Basement Flooring

    Basements and lower-level rooms here sit on concrete that can hold moisture. We test the slab first, then choose a basement flooring system that can handle what we find.

  • Pool Deck Coatings & Resurfacing

    Backyard pools are common here, and older decks tend to crack, stain and get slick at the edge. We repair the cracks and resurface the deck with a textured, slip-resistant coating.

  • Concrete Floor Stripping & Removal

    Many garages here carry an old store-bought coating that's peeling in patches. We strip it and grind to clean concrete, because a new coat won't hold over a failing one.

  • Commercial & Industrial Epoxy Floor Coatings

    Shops, studios and offices along Danville's downtown streets see steady foot traffic and can't close for long. We plan the prep and coating around your hours, using our own crew.

  • Concrete Sealing

    Patios and walkways around Danville homes pick up stains from leaves, grills and sprinklers. We clean the concrete and apply a sealer that soaks in, so spills wipe up instead of staining.

What to know before a floor job in Danville

Inside Danville's limits, building permits go through the Town of Danville's Building Division, which you reach through its Permit Center, and addresses outside those limits fall under Contra Costa County. The Town requires permits for most construction and repair work, so we check with the right office before we start, and if a permit is needed we get it and set your date around it. Before you hire anyone, check two things. The state licensing board says anyone in the home improvement business has to be licensed in their trade before advertising or bidding, unless the whole contract, labor and materials included, comes in under $500, and the Permit Center also handles Danville business licenses, so it's fair to ask a contractor about both. We're licensed and fully insured, and I'm glad to show you our paperwork.

Danville is a short drive up I-680 from Pleasanton, and we work it the same way we work Ashland and the other cities around us. What moves the price here is the slab more than the size alone, meaning the cracks to fill, any old coating or sealer to strip, and which system you choose, since a metallic floor takes more hand work than a flake finish. The schedule turns on testing, prep and any permit, and the written estimate from my visit puts your own number on paper.

Danville, CA properties and local conditions

Big garages here rarely hold just cars. We see home gyms with dropped weights, workbenches with oil and solvent drips, and second freezers dragged across the floor, and each of those wears a thin coating through in spots. For a garage like that we grind the slab open so the coating bonds, then build it thick enough to take the use, usually with a flake finish that hides grit and wipes clean.

Pool decks are the other thing we see on many Danville lots. They crack and pit as they age, and a fresh coat over a damaged deck just shows the same cracks again, so we repair and resurface first and finish with texture so wet feet have grip.

Get a free on-site estimate for your Danville floor

Tell us about the floor and your Danville address, and we'll reply within one business day. I'll come out myself, look at the slab, ask how you use the space and put the price in writing. The estimate is free, with no obligation.

What happens when you call us about a Danville floor

  1. Call us or send the form

    Give us the address and tell us whether it's a garage, basement, patio or shop, so I know what to look for. We set a time for me to come out.

  2. I look at the slab

    I check the concrete for cracks, old coatings and moisture, ask how you use the space and leave you a written estimate. If a floor isn't a good fit for what you want, I'll tell you then, before you've spent anything.

  3. We prep and finish the floor

    Once you pick a system, we set the date around testing, prep and any permit, and our own crew does the grinding and coating. The Town allows work from 7:30 a.m. to 7 p.m. on weekdays and 9 a.m. to 7 p.m. on weekends and holidays, and projects that went through the Town's special review can have tighter hours.

  4. Walk the floor together

    When the coating is done, we walk the floor with you and go over anything you want a closer look at. The work is backed by our satisfaction guarantee.

Frequently asked questions

Do I need a permit to put an epoxy floor in my Danville garage?

The Town's permit list doesn't name floor coatings, but it covers most construction and repair work and says the list isn't complete, so the answer for your job comes from the Building Division. We ask about your job before we start, and if a permit is needed we get it.

How do I check if my Danville address is inside the Town limits?

Call the Town's permit desk at (925) 314-3330, since addresses outside the Town's boundary fall under Contra Costa County instead. It matters because the county, not the Town, would then decide on any permit, and we sort this out when we set up your job.

How long does a building permit last in Danville?

Once the Town issues a permit, you have 365 days to finish the work, and inspections can be booked as long as all fees are paid. An approved permit that isn't issued within 180 days expires and the fees paid are lost, so we keep the paperwork moving if your job needs one.

Does the Central Contra Costa Sanitary District need to stamp plans for a new floor in Danville?

The district's stamp is needed for some projects, and its list covers adding, moving or removing plumbing fixtures, building past the existing footprint and adding things like a deck, gazebo, backyard unit or carport, with no mention of floor coatings. If your floor is part of a remodel that touches a drain or fixture, the district stamps the plans before the Town application goes in.

How much does an epoxy garage floor cost in Danville?

I can't give a fair number until I've seen the slab, because prep is the part that varies most between Danville garages. A clean slab that only needs grinding costs less to coat than one with patched cracks and a peeling kit coating, and a simpler system is often the better pick for a tight budget, which I'll tell you on the visit.

What causes epoxy garage floors to peel?

Most peeling comes from prep, when a coating goes over concrete that wasn't ground open, was holding moisture or still had old sealer on it. That's common on older Danville garages that got a store-bought kit, so we test the slab and grind it to clean concrete before anything goes down.

Service areas

Explore the services

Pleasanton, CA

Send us your Danville address for an estimate

Call (925) 209-2459 weekdays from 6 AM to 11 PM or weekends from 8 AM to 9 PM, or send the form with a photo of the floor.

Request a quote(925) 209-2459
(925) 209-2459Request a quote