Concrete Resurfacing & Overlays in Pleasanton CA - a new surface on solid concrete
Pitted, stained or worn driveway, patio or garage floor? We check the slab first, then give solid concrete a fresh, durable surface.
- Licensed and fully insured.
- Free quotes on site.
- We respond within 1 business day.
Can worn concrete be resurfaced instead of replaced?
Concrete resurfacing in Pleasanton, CA spreads a cement topping mixed with polymers over your existing driveway, patio or floor, giving solid concrete a durable new surface that can be left with a rolled texture or stamped with a pattern.
Most people call us at Artisan Epoxy Flooring of Pleasanton when a slab is pitted, stained, scaled or patched and they'd rather not tear it out, and an overlay is usually the right call as long as the concrete underneath is solid and staying put. The price moves with how big the area is, how much prep the slab needs and which finish you pick, and the schedule turns on that prep and the weather. I'll look at the slab in person and put the price in writing before you decide anything.
How we handle concrete resurfacing and overlays
First I take a hard look at the concrete and any paint or sealer on it, and if the slab isn't a good fit, I'll say so instead of covering it up. When it is, we grind the surface clean and open so the topping has something to grip, which matches one maker's preference for mechanical prep like shotblasting over acid etching, a method it doesn't recommend. Then our crew patches what needs it, spreads the cement topping, finishes it with a roller texture or a stamp and keeps everyone off it until it's ready to use.
Some floors need a different fix. If an indoor floor is uneven or low in spots, self-leveling concrete and overlays bring it back to flat before a finish goes down, and around the pool, pool deck coatings and resurfacing give the deck a surface made for bare feet, water and sun.
Rolled texture for driveways and walks
A roller leaves a light texture in the topping, which suits driveways, walks and garage aprons where you want grip and a clean, even look. It's the simpler finish, so it usually keeps the job leaner.
Stamped finish for patios and entries
Stamping presses a pattern into the topping, so a plain patio or entry can take on the look of stone or tile. It takes more labor than a rolled finish, so it's the one to pick when looks matter most.
Concrete resurfacing in Pleasanton and the rules that touch it
In Pleasanton, storm drains take runoff from driveways and streets to local creeks and out to the bay, and the city requires sediment and other pollutant controls on construction projects. Grinding and mixing cement make dust and slurry, so we keep that debris and wash water contained and off the street instead of letting it reach the gutter, and you can ask me on the visit which controls we'll set up at your house. Most of our resurfacing calls are for tired driveways, patios and garage floors, and we're based in Pleasanton and take jobs in the cities around it, homes and commercial spaces alike, so we see the same worn, sealed and patched slabs on jobs in Dublin and Livermore.
Whether resurfacing your slab needs a permit is the city's call, not mine, so we check with the City of Pleasanton before we start, and if one is needed, we take care of getting it.
Why Pleasanton homeowners call Artisan Epoxy Flooring of Pleasanton for resurfacing
I look at every slab myself
I come out to see the job in person, and I run the crew that does the work. That way nothing I noticed about your slab gets lost between the estimate and the first day of prep.
Prep-first floors since 2021
I spent years cleaning floors that were peeling and wearing through before starting this business in 2021, and most of those failures started before the coating ever went on. That's why we'd rather spend the time testing and grinding than see your new surface lift.
Licensed and fully insured
We're licensed and fully insured. That matters on a resurfacing job because grinders, cement and our crew are working on your property, and you shouldn't be the one carrying that risk.
Work days set by the forecast
One maker's resurfacer isn't applied below 45° F, above 90° F or with rain on the way, so we pick the work day by the forecast and move it when the weather turns. Waiting a day is easier on you than living with a topping that went down in the wrong conditions.
On a resurfacing job, the slab underneath decides everything, so the next step is letting me see it. Request your estimate or call (925) 209-2459.
Request a quoteGet a written price for resurfacing your concrete
We respond within 1 business day, and the quote is free, on site and obligation-free. Once you send the form, I'll set a time to come look at the slab, talk through the finishes and put the price in writing.
What happens after you call about resurfacing in Pleasanton?
I come out to see it
When you call, I come out myself, look at the slab and any paint or sealer on it, and ask how you use the space. You get a written estimate with the price and the finish options, so you know the cost before anything is scheduled.
We set the date around prep
Once you pick a finish, we schedule around testing, prep and the forecast. If any of the work reaches the sidewalk or street and needs an encroachment permit for it, the city usually issues that the same day, though a complicated one with a traffic control plan can take up to 4 business days.
Our crew preps and finishes
Our own crew does the grinding, the topping and the finish, the same people from start to end. When we're done, I walk the new surface with you and go over when you can use it again.
Frequently asked questions
How much does concrete resurfacing cost in Pleasanton?
The cost comes down to the size of the area, the prep your slab needs and the finish you choose, so I give you a written figure after I've seen the concrete. A rolled texture on a clean, bare slab costs less than a stamped finish over concrete that first needs old paint or sealer ground off. Crack repair and a lot of stripping add labor, while a simple texture keeps the job leaner.
What is the best way to tell if my concrete can be resurfaced?
The best way is to have someone look at the slab in person, because an overlay is made for concrete that's solid and not moving. One maker formulates its overlays for structurally sound, non-moving concrete, so a slab that's heaving, sinking or still shifting isn't a candidate. Where your slab falls is something I'll tell you on the estimate visit.
Can an overlay go over painted or sealed concrete?
Not until the paint or sealer comes off, because one maker's data sheet calls for a clean surface and rules out putting its resurfacer over painted or sealed concrete. So mention any coating when you call, and plan on removing it first through concrete floor stripping and removal before the topping goes down.
How long does resurfaced concrete need before you can walk or drive on it?
With one maker's cement resurfacer, you can walk on it in 2 to 3 hours and drive on it in 4 to 8 hours. Other products run on their own times, so I'll give you the numbers for the one going on your slab and tell you when to keep people and cars off.
Will old cracks and joints show through a concrete overlay?
Yes, the joint lines usually stay, because one maker's guide carries existing control and expansion joints, the cut lines that let concrete move, right through the new topping. The same guide leaves moving cracks unbridged, so an overlay isn't a way to hide a crack that's still opening and closing.
Do I need a licensed contractor to resurface concrete in California?
California requires a license for this kind of work even on jobs under $1,000 whenever the work needs a permit of any kind or the person doing it hires workers to help. The state licensing board counts forming, pouring, placing, finishing and installing flat concrete work as concrete contracting, so ask any crew you're considering about their license before you sign.
Related concrete work
Self-Leveling Concrete & Overlays
If an indoor slab dips, slopes or sits uneven, a self-leveling pour brings it back to flat so tile, coatings or a polished finish have a true surface to sit on.
Pool Deck Coatings & Resurfacing
When the concrete around your pool is faded, rough underfoot or wearing thin, we can recoat or resurface the deck with a finish chosen for bare feet, water and sun.
Pleasanton, CA
Send us photos of your slab
A few photos and a note on any cracks, paint or sealer let me tell you on the first visit whether an overlay is the right fix.