Artisan Epoxy Flooring of PleasantonArtisan Epoxy Flooring of Pleasanton

Flooring Contractor in Alamo, CA - Garage Floors and Pool Decks Built on Good Prep

Artisan Epoxy Flooring of Pleasanton coats, polishes, seals and resurfaces concrete in Alamo, CA, on garages, patios, pool decks and shop floors, and we test and grind the slab first so the finish has solid concrete to hold.

Request a quote(925) 209-2459
Speckled sealed concrete porch steps and landing beside a red brick wall.
  • Licensed and fully insured.
  • Free quotes on site.
  • We respond within 1 business day.

About Alamo, CA

Alamo is almost all homes, and many of them sit on bigger lots than you'll find in most of the cities we work in. They come with long driveways, detached garages, a pool out back and now and then a barn or a horse setup. There's a small run of shops near the center of Alamo, but most of our calls here come from homeowners.

The houses run from older ranch homes to newer custom builds, much like next door in Danville, and the concrete under them varies just as much, so we look at each slab before we talk about what goes on it.

Services in Alamo, CA

  • Garage Floor Coatings

    Alamo garages run big and often double as a gym or workshop. We grind the slab, fix the cracks and put down a coating made for tires, tools and spills.

  • Pool Deck Coatings & Resurfacing

    Many Alamo backyards have a pool ringed by cracked or slick concrete. We repair the cracks and resurface or coat the deck with a textured finish that gives bare feet grip.

  • Concrete Sealing

    Long driveways and patios mean a lot of concrete taking in oil and sprinkler water. We clean it and do the concrete sealing so stains sit on top instead of soaking in.

  • Concrete Floor Stripping & Removal

    Older garages here often have peeling paint from a past owner. We strip it to bare concrete, because a new floor over a failing one usually lifts with it.

  • Concrete Resurfacing & Overlays

    Older patios and walkways here are often flaking or patched in a few colors. We lay a thin overlay that gives one even surface without tearing out sound concrete.

  • Polished Concrete Flooring

    Some newer custom homes and converted barns here have plain concrete floors indoors. We grind and polish that slab into a hard, glossy floor with nothing on top to peel.

Working in Alamo means working with the county

Alamo has no city government of its own, so Contra Costa County issues building permits and runs inspections here, and it's the county's call whether your floor job needs a permit. We check with county staff before we start, and if a permit is needed we take care of getting it and set the start date around it. We're licensed and fully insured, and when you compare contractors here, check two things. One is a state contractor's license from the Contractors State License Board, since the county only issues permits to licensed contractors, owners or their authorized agent. The other is a Contra Costa County business license, which the county requires of contractors working in Alamo even when they're based and licensed in another city.

We're a flooring contractor based in Pleasanton, CA, a straight run up 680 from Alamo, and we do the same work in San Ramon along the way. A lot of properties here sit up long private drives or on hillside streets, so we plan where the trailer, grinder and dust vacuum go before the crew shows up. What moves the price is mostly the floor itself: its size, how much old coating or sealer has to come off, how many cracks need repair and which system you pick. The schedule turns on testing, prep and any permit, and I put your price in writing once I've seen the slab.

Alamo, CA properties and local conditions

Garages on Alamo's older ranch homes were often poured decades ago and have been painted, sealed or patched by more than one owner since. A coating laid over that won't grip, so we test for moisture and old sealers and grind down to clean concrete first. If the slab can't support the floor you have in mind, I'll tell you on the first visit and suggest something simpler, like a good sealer.

Big lots also mean a lot of outdoor concrete, from pool decks to patios that wrap the house. Pool water, chemicals and bare feet wear those surfaces differently than cars wear a garage, so we use outdoor systems and textures made for wet concrete instead of a garage coating.

Get a free written floor estimate for your Alamo home

Send the form and we respond within 1 business day to set a time for me to come out to your place in Alamo. The estimate is free and on site, and it's obligation-free, so you can take the written price and think it over.

How it goes when you call us about a floor in Alamo

  1. Tell us about the floor

    Call or use the form and let us know whether it's a garage, patio, pool deck or something else. We set a time for me to come out to Alamo.

  2. I look at the slab

    I come out myself, check the concrete for old coatings, cracks and moisture, and ask how you use the space. You get a written estimate, and if a floor isn't a good fit for what you want, I'll say so then.

  3. We set the date

    Once you pick a system, we schedule around testing, prep and any permit the county requires. We let you know ahead of time what needs to be cleared out of the space.

  4. We prep, finish and walk it

    Our own crew does the grinding, repairs and finish, and I run that crew. At the end we walk the floor with you before you move anything back.

Frequently asked questions

Who issues building permits in Alamo, CA?

Contra Costa County issues building permits in Alamo, because Alamo is unincorporated and has no city building department. The county handles permits and inspections for all of its unincorporated area, and its permit information page points to the CCMAP map tool if you want to confirm which agency covers your address.

How do I find out if my floor project in Alamo needs a permit?

Ask Contra Costa County's permit staff, because the county decides and its permit list names work like remodels, alterations and repairs rather than floor coatings. The county says almost all projects in its unincorporated area need a building or grading permit, and it asks owners to contact staff about anything not spelled out. We make that check as part of the job.

Does my flooring contractor need a Contra Costa County business license to work in Alamo?

Yes, the county requires a business license, which is an annual tax, for doing business in its unincorporated area, and that includes state-licensed contractors. It applies even to a contractor based outside the county or licensed by another city, so a contractor from a city like Pleasanton needs a license from that city and one from the county.

How much can a contractor ask for as a down payment in California?

A contractor's down payment is capped at $1,000 or 10 percent of the total contract price, whichever is less. The Contractors State License Board says that rule covers all home improvement projects, so it applies to floor work in Alamo the same as any other job.

How much does a garage floor coating cost in Alamo?

The price comes down to the size of the floor, how much prep the slab needs and which system you choose, and I give you the figure in writing after I've seen it. Old paint or sealer to grind off, a lot of cracks and a decorative flake or metallic finish add to it, while a clean slab and a simpler coating or sealer cost less.

What is the best floor coating for a garage in Alamo?

For most garages here we recommend a fully ground slab with an epoxy base coat, decorative flake and a polyaspartic topcoat, because the flake gives grip and hides dirt and the topcoat stands up to hot tires and spills. Metallic epoxy looks great but shows scratches and dust more, so we steer working garages toward flake and save metallic for spaces that get lighter use.

Service areas

Explore the services

Pleasanton, CA

Tell us about your Alamo floor

Call (925) 209-2459 or use the form to describe the space and ask about permit steps, so I know what to look for before I come out.

Request a quote(925) 209-2459
(925) 209-2459Request a quote