Epoxy Floor Coatings in Pleasanton CA - a coating that holds to a tested slab
Stained, dusty or chipped concrete? We test and repair the slab first, then put down an epoxy floor that's easy to keep clean.
- Licensed and fully insured.
- Free quotes on site.
- We respond within 1 business day.
Is my concrete ready for an epoxy floor coating?
An epoxy floor coating covers a concrete slab with coats of epoxy that cure into a finished floor, and in Pleasanton we put it down on garages, basements and shop floors once the slab has been checked and prepped.
Most people call when the bare slab is staining, dusting or cracking and they want something tougher that's easier to clean. The price mostly turns on the size of the floor, how much crack and chip repair the slab needs and which finish you pick. The schedule turns on the slab too, because the moisture check and repairs come before the coating date, and each coat needs time to cure before the next one goes on. I look at the slab on the first visit and put the price in writing, and if epoxy isn't the right fit for what you want, I'll tell you then.
How we put down an epoxy floor coating
I start by looking at the slab and asking how you use the space, because that decides the finish. Before we set a coating date, we test the slab for moisture and fix the cracks, chips and old patches, since epoxy only holds on concrete that's dry and sound. Then we grind the surface so the coating has something to grab, clear out every bit of dust and lay down the coats, with sand or flake spread into them for the finish you chose.
A lot of our epoxy work is garage floor coatings, where the floor takes hot tires, dropped tools and whatever drips off the car. For shops, warehouses and tenant spaces, we plan commercial and industrial epoxy floor coatings around the traffic and cleaning that space gets.
Sand finish for grip
Silica sand spread into the coating usually gives a solid-colored floor with a skid-resistant texture, so it suits garages that get wet, workshops and any floor where footing matters more than looks. When a floor gets wet often, this is the one I'd pick, even though it's a little rougher to mop.
Flake finish for a stone look
Vinyl chips spread into the coating give a multi-colored look a lot like terrazzo or granite, so it suits a garage you want to look finished, a basement or a showroom. The flakes also hide dust and small marks between cleanings.
What Pleasanton expects of an epoxy floor coating job
In Pleasanton, the city's Building and Safety Official issues permits for alterations and repairs, and the city's list of work that doesn't need a permit names painting and similar finish work but doesn't name epoxy coatings. That leaves the question open for a coating job, so we check with the city before we start, and if a permit is needed, we take care of getting it. Work that doesn't need a permit still has to meet the California Building Standards Code and the city's Municipal Code. If your project also adds or changes electrical, gas, plumbing or mechanical work, like a new outlet or a floor drain, that part needs an application to the same office before it starts.
We're based in Pleasanton and take jobs in the cities around it, homes and commercial spaces alike. Garage slabs here usually come with oil stains, hairline cracks or an old sealer or paint that has to come off before anything new will stick, and we grind and repair them the same way on jobs in Dublin and Livermore.
Why Pleasanton homeowners call Artisan Epoxy Flooring of Pleasanton for epoxy floors
I look at your slab myself
On every Pleasanton estimate, I come out myself, and I run the crew that does the work. The person who saw your cracks is the same one on site when they get fixed, so nothing gets lost between the quote and the job.
Five years on coated floors
We've been coating floors since 2021, and before that I ran a commercial cleaning company and spent years on floors that were peeling, staining or wearing through. That's why we'd rather spend the time testing and grinding than see a floor start lifting.
Licensed and fully insured
We're licensed and fully insured. That protects you and your house while our crew is grinding and coating, and it's worth asking of any contractor you're comparing.
Every floor we finish is backed by our satisfaction guarantee. If your garage or shop floor is starting to stain, crack or peel, send us the details and I'll come out and look at it.
Request a quoteGet a written estimate for your epoxy floor
Send the form and we'll reply within one business day to set a time for me to come out. The estimate is free and on site, with no obligation, and I'll look at the slab, talk through the finishes and put the price in writing.
What happens after you call about an epoxy floor in Pleasanton?
Call or send the form
Call (925) 209-2459 or use the form, and we set a time for me to come out. It helps to know roughly how big the floor is and how you use the space.
I check the slab
I look at the concrete, cracks and all, ask how you use the floor and talk through the options. You get a written estimate with the price, so you see the full cost before you commit to anything.
We schedule around prep
Once you pick a system, we set the coating date around the moisture test and any repairs. The coating goes on after the slab is ready, not before.
Prep, coat and walk-through
Our own crew does the grinding, repairs and coats. When it's done, we walk the finished floor with you.
Frequently asked questions
How much does an epoxy floor coating cost in Pleasanton?
Across the US, an installed epoxy garage floor coating usually runs about $3 to $12 per square foot. Where your floor lands in that range comes down mostly to how much repair the slab needs and which finish you choose. I give you your own price in writing after I've seen the slab.
What causes an epoxy floor to peel up?
Moisture in the slab is the usual cause. Epoxy can fail when it goes on damp concrete or a slab that gives off a lot of moisture vapor, and the coating comes loose from the concrete, which installers call delamination. That's why measuring the slab's relative humidity before coating is the recommended first step.
How long does an epoxy floor take to cure between coats?
Many epoxy coatings need 24 to 48 hours between coats, and the exact time varies from one maker to the next. Plan to keep the floor clear between coats and follow the coating maker's guidance on foot traffic while it cures. Weather plays in too, since heat shortens the time we have to spread the epoxy and cold can stretch the cure.
Will an epoxy garage floor turn yellow in the sun?
Some epoxy coatings can discolor over time from sunlight, and that's their main drawback in looks. If your garage door stays open a lot or the floor gets direct sun, ask how the coating you're choosing holds its color, and we'll go over it before you pick a system.
What should an epoxy floor quote include?
A good quote says whether the moisture test and crack repair are covered, because both have to happen before the coating goes on. Ask that of anyone you're comparing. A quote that leaves them out can look cheaper and still cost more once the slab is open.
How do I prepare concrete for an epoxy coating?
The concrete has to be roughened and made absorptive, and one coating maker's guide says to do that preferably by mechanical means, then clean off all dust and debris. Your part is clearing out the space so the whole slab can be tested and worked on.
Other floor work people pair with epoxy
Garage Floor Coatings
If the floor you're thinking about is the garage, this page covers the coatings built for car traffic, dropped tools and the oil and water that tracks in off the driveway.
Commercial & Industrial Epoxy Floor Coatings
Shops, warehouses and tenant spaces take forklift wheels, carts and heavier cleaning, so a property manager planning a new floor should start with our commercial and industrial coating options.
Pleasanton, CA
Get your epoxy floor estimate on the calendar
Have the floor's rough size, a few photos of any cracks or chips and a note on how you use the space ready, so the first visit gets straight to your options.